Atop-technology SE5002 User manual Instrukcja Użytkownika Pobierz pdf (Strona 23)

User manual Version 1.3

ABLELink

Ethernet Serial Server SE5002

- 22 -

3.3.4 Configuring SE5002 as TCP server：

SE5002 is configured in a transparent mode by default (Fig. 26)

Î Click on “COM1” link and the following screen shall appear.

Î Configure SE5002 as TCP server

Î Input local listening port “4660”

1.To enable IP filter：

Î Check “IP filter”

Î Input source IP on “Source IP”

2.If not to enable IP filter：

Î Don’t check “IP filter”

Î Input idle time on “Please input idle time to send TCP keep-alive packet(sec)

：

”( 2->the sending

TCP keep-alive packet period will be 2*10 sec)

Î Input TCP Inactivity time in “TCP Inactivity Time Before Disconnect( sec)

：

”( 2->TCP Inactivity

beyond 2 sec will cause disconnect )

Î Click on “Save Configuration” button to save the changes

Notes:

1. One may configure COM1 or COM2 parameter by choosing COM1 or COM2 Link

2. IP filtering function is disabled by setting FILTER_IP to “0.0.0.0”.

3. IP filter is disabled by default

4. If IP filter is enabled, only source IP assigned is connected to SE5002.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Brak uwag

Atop-technology SE5002 User manual Instrukcja Użytkownika Strona 23